ACCURATE ENGINEERING

1. Machine Construction: Square column construction with heavy-duty linear rail and block assembly.

2. Cutting Capacity:

   • Round: Ø 450 mm

   • Flat: 450 × 450 mm

3. Main Drive Motor: 7.5 HP.

4. Hydraulic Motor: 2 HP.

5. Coolant Motor: 1/6 HP.

6. Bandsaw Blade Supply: 01 No. included.

7. Blade Width: 41 mm.

8. Gearbox: Helical bevel gearbox.

9. Height Adjustment: Automatic height adjustment system.

10. Blade Guide System: One-side moving blade guide box.

11. Blade Guide Construction: Movable blade guides with tungsten carbide wear plates and bearing support.

12. Machine Structure: Heavy-duty stress-relieved fabricated structure, fully welded and torsion-proof.

13. Blade Cleaning System: Friction-type rotating wire brush arrangement.

14. Hydraulic System: Inbuilt hydraulic power pack.

15. Hydraulic Cylinders: All cylinders are double-acting type, with all functions operated hydraulically.

16. Hydraulic Tank Capacity: 70 liters.

17. Hydraulic Oil Grade: ISO VG 68.

18. Gearbox Support: Extra cylindrical roller bearing support for gearbox output shaft.

19. Coolant Tank Capacity: 80–100 liters.

20. Automation System: Mitsubishi make PLC with HMI.

21. Automatic Functions: Automatic saw OFF and coolant OFF after each cutting cycle.

22. Flow Control Valve: Rexroth make flow control valve.

23. Safety Feature: Interlocking arrangement for blade breakage.

24. Electrical Supply: 3 Phase, 415 V, 50 Hz.

1. Machine Model: ACCUCUT 650SPB

2. Machine Type / Automation: Automatic Bandsaw Machine

3. Country of Origin: Made in India

4. Cutting Capacity: 650 × 550 mm

5. Saw Blade: 7200 × 54 × 1.6 mm

6. Material Grade: Mild Steel (MS)

7. Voltage / Electrical Supply: 415 V, 50 Hz, 3 Phase

8. Machine Structure: Heavy-duty, fully welded torsion-proof construction

9. Blade Guide System: One-side moving blade guide box

10. Gearbox: Heavy-duty helical bevel gearbox

11. Blade Cleaning System: Rotating wire brush arrangement

12. Material Handling: Inbuilt in-feed and out-feed rollers

1. Column Construction: Square column construction with heavy-duty linear rail and block assembly.

2. Cutting Capacity:

   • Round: Ø 650 mm

   • Flat: 800 × 650 mm

3. Blade Speed: Variable speed through step pulley arrangement.

4. Cutting Feed: Infinitely variable cutting feed regulated by hydraulic flow control valve.

5. Bandsaw Blade Supply: 01 No. included.

6. Blade Width: 67 mm.

7. Gearbox: Heavy-duty helical bevel gearbox.

8. Height Adjustment: Automatic height adjustment system.

9. Blade Guide System: One-side moving blade guide box with tungsten carbide wear plates and bearing support.

10. Machine Structure: Fully welded, heavy-duty torsion-proof and stress-relieved fabricated structure.

11. Blade Cleaning System: Friction-type rotating wire brush arrangement.

12. Hydraulic System: Inbuilt hydraulic power pack with all functions operated hydraulically.

13. Hydraulic Cylinders: All cylinders are double-acting type.

14. Gearbox Support: Extra cylindrical roller bearing support for gearbox output shaft.

15. Automatic Functions: Automatic saw OFF and coolant OFF after completion of each cutting cycle.

16. Bow Movement: Automatic bow return after cutting.

17. Control Panel: Electrical control panel with relay logic control.

18. Safety Feature: Interlocking arrangement for blade breakage.

19. Electrical Supply: 3 Phase, 415 V, 50 Hz.

1. Column Construction: Square column design with heavy-duty linear rail and block assembly.

2. Cutting Capacity:

   • Round: Ø 650 mm

   • Flat: 1550 × 650 mm

3. Blade Speed: Variable speed through step pulley arrangement.

4. Main Drive Motor: 15 HP.

5. Hydraulic Motor: 2 HP.

6. Coolant Motor: 1/6 HP.

7. Cutting Feed Control: Infinitely variable cutting feed regulated by hydraulic flow control valve.

8. Blade Width: 67 mm.

Specification & Standard Supply

1. Machine Type: Double Column Bandsaw Machine with heavy-duty linear rail and block assembly

2. Cutting Capacity:

   • Round: Ø 750 mm

   • Flat: 500 (W) × 750 (H) mm

3. Blade Speed: Variable, through step pulley arrangement

4. Main Drive Motor: 10 HP

5. Hydraulic Motor: 2 HP

6. Coolant Motor: 1/6 HP

7. Cutting Feed Control: Variable feed rate through hydraulic flow control valve

8. Height Adjustment: Through control panel operation

9. Bandsaw Blade Supply: 01 No. included

10. Blade Width: 54 mm

11. Blade Guide System: One-side moving heavy-duty blade guide box

12. Machine Structure: Fully welded, heavy-duty torsion-proof frame

13. Main Support System: Hydraulic main support for workpiece stability

14. Material Handling: Inbuilt in-feed and out-feed rollers

15. Gearbox: Heavy-duty Helical Bevel Gearbox (PBL make)

16. Blade Cleaning System: Rotating wire brush cleaning unit

17. Linear Motion System: Heavy-duty linear rails and blocks (HIWIN make)

18. Blade Tensioning: Hydraulic blade tensioning system

19. Job Clamping: Hydraulic job clamping system

20. Vice System: Floating shuttle vice system for accurate and repeatable cutting

1. Machine Construction: Double column bandsaw machine with heavy-duty linear rail and block assembly (HIWIN make).

2. Cutting Capacity:
   i. Round: Ø 450 mm
   ii. Flat: 1000 × 450 mm

3. Blade Speed Control: Variable speed through VFD (Variable Frequency Drive).

4. Main Drive Motor: 10 HP.

5. Hydraulic Motor: 2 HP.

6. Coolant Motor: 1/6 HP.

7. Cutting Feed: Variable cutting feed controlled through hydraulic flow control valve.

8. Height Adjustment: Automatic height adjustment system.

9. Bandsaw Blade Supply: 01 No. included.

10. Electrical System: Electric control panel with standard safety interlocks.

11. Hydraulic Components: Integrated flow control valve for precise feed regulation.

12. Blade Guide System: One-side moving heavy-duty blade guide box.

13. Machine Structure: Fully welded, heavy-duty torsion-proof frame.

14. Gearbox: Heavy-duty helical bevel gearbox (PBL make).

15. Blade Cleaning System: Rotating wire brush for continuous blade cleaning.

16. Column Design: Heavy-duty square twin column construction for maximum rigidity.

17. Material Support: Support stand – 1.5 meter length (1 No.).

1. Machine Type: Horizontal Bandsaw Machine.

2. Country of Origin: Made in India.

3. Saw Motor: 7.5 HP.

4. Hydraulic Motor: 2 HP.

5. Coolant Motor: 1/6 HP.

6. Cutting Feed: Variable feed controlled through hydraulic flow control valve.

7. Cutting Capacity: 360 × 415 mm.

8. Bandsaw Blade: 4860 × 41 × 1.3 mm.

9. Machine Structure: Heavy-duty, fully welded torsion-proof construction.

10. Blade Guide System: One-side moving blade guide box.

11. Gearbox: Heavy-duty helical bevel gearbox.

12. Blade Cleaning System: Rotating wire brush arrangement.

13. Material Handling: Inbuilt in-feed and out-feed rollers.

14. Electrical Supply: 3 Phase, 415 V, 50 Hz.

15. Minimum Order Quantity: 1 Piece.

1. Machine Construction: Double column bandsaw machine with heavy-duty linear rail and block assembly.

2. Cutting Capacity:

   • Round: Ø 300 mm

   • Flat: 600 (W) × 300 (H) mm

3. Blade Speed Control: Variable speed through VFD (Variable Frequency Drive).

4. Main Drive Motor: 10 HP.

5. Hydraulic Motor: 2 HP.

6. Coolant Motor: 1/6 HP.

7. Cutting Feed: Variable cutting feed controlled through hydraulic flow control valve.

8. Height Adjustment: Operated through the control panel.

9. Bandsaw Blade Supply: 01 No. included.

10. Blade Width: 41 mm.

11. Blade Guide System: One-side moving blade guide box.

12. Machine Structure: Fully welded, heavy-duty torsion-proof structure.

13. Main Support System: Hydraulic main support with hydraulic holding arrangement.

14. Material Handling: Inbuilt in-feed and out-feed rollers.

15. Gearbox: Heavy-duty helical bevel gearbox.

16. Blade Cleaning System: Rotating wire brush cleaning arrangement.

17. Linear Motion System: Heavy-duty linear rail and block arrangements (HIWIN make).

18. Column Design: Heavy-duty square twin column construction.